Dome
Transparent self-cleaning UV stablised
acrylic, fixed to upright with 4 screws.
Top Frame
Injection-moulded upright section using Luran-SA high-quality, UV stabilised plastic (as used on motor vehicle bumper bars).
Soaker Tray
0.55 Lysaght steel in either galvanised or
Zincalume finish. Colourbond used on tile roofs. The bottom edge has a lead flashing strip
attached for tile roofs.
Vent System
"Easy Change". Can be removed or
changed as the climate dictates. A series of 12 holes (400mm) or 18 holes (500mm) can be
used creating 22,000mm˛ or 55,000mm˛ of air space using the ventilator tabs or solid
tabs can be substituted in any proportion where full ventilation is not required. The tabs
can also be cleaned to keep the airflow at maximum benefit.
Reflective Ring
0.45mm mirror finish stainless steel to catch
sun from all angles.
Tube
A highly reflective UV proof quadruple
laminate, consisting of double outer layer of metalised polyester film with a double inner
layer of reinforced glass fibre filament, yarn mesh aluminium metal foil. The tube can be
flexed to avoid timbers, air-conditioning ducts and most other obstructions, eliminating
the need to remote structural timbers, however bends should be avoided to maximise light
transmission.
Ceiling Frame
Injection moulded white ABS. thermoplastic.
Diffuser
Non Vented - K-12 Prismatic. Variations
available on request, e.g. opaque acrylic.
Vented - K-12 Prismatic raised approximately 15mm above frame exposing a vent gap.
Variations available on request e.g. acrylic or eggcrate.
Guarantee
A 7 year guarantee against rust, corrosion and
material deterioration, plus installation when carried out by an approved Atlite
installer. |
Superior
light transmission
